Fujairah Rockwool Factory Awards EIS the Contract to Provide Maintenance Services of the CEMS

Enviro & Industrial Solutions ME acquires a new contract for the preventive & corrective maintenance of Fujairah Rockwool Factory’s Continuous Emission Monitoring System (CEMS).

Key Technologies

  • Fuji NDIR ZRE Analyser for NO, SO2, CO2 & O2
  • Fuji ZRJ Infrared Gas Analyser for CH4 & CO
  • JCT Sampling & Conditioning System
  • Sintrol Dust Stack Monitor
  • Envitech Environmental Services WinEmag Data Acquisition System

About Fujairah Rockwool Factory

Fujairah Rockwool Factory is a group company of the Fujairah Building Industries PSC. Established in 1982, Fujairah Rockwool became the first manufacturer of Rockwool insulation in the GCC region.

With humble beginnings from a 5000 metric ton factory, Fujairah Rockwool has continuously grown and expanded its operations to become the largest manufacturer of insulation products in the Middle East, Far East and many parts of the world.

Fujairah Rockwool products are used for insulation in both commercial and industrial establishments like power plants, desalination plants, petrochemical plants, refineries as well as houses, offices, buildings, schools, factories and more.

The R&D Department of Fujairah Rockwool is continuously striving to develop new product applications for this remarkably versatile product.

Dubai Electricity & Water Authority Awarded EIS-ME a Contract to Supply & Commission Continuous Emission Monitoring System (CEMS)

Enviro & Industrial Solutions ME has been awarded to supply & commission Continuous Emission Monitoring System for six stacks in Dubai Water & Electricity Authority (DEWA), Jebel Ali. The Continuous Emission Monitoring System has been designed to monitor certain parameters using certified analyzers and professional sampling and conditioning systems. Stack Emission monitoring will assist in the method of assessment of gases and its amount of presence in the atmosphere. This project will help DEWA to meet and stay in the environmental standards, collect data for emission reports, plus observe and control emissions released from stacks.

Key Technologies

  • Fuji Electric Gas Analyzers. These provide infrared and cross-stack laser process analysis for compliant CEMS and process applications. Multi-component infrared analyzers are available for up to 5 gases.

About Dubai Electricity & Water Authority (DEWA)

DEWA was founded in 1992 by Sheikh Maktoum bin Rashid Al Maktoum. The Dubai Government fully supported the Electric Company and the Water Department to provide Dubai’s citizens and residents with a continuous and reliable supply of electricity and water. DEWA has made significant achievements since then and it continuously provides service to customers.

Continuous Emissions Monitoring System for Saudi Arabia based Environmental Company

Environment Development Company (EDCO), a Saudi Arabia based organization, has trusted their Continuous Emissions Monitoring System (CEMS) requirement with Enviro & Industrial Solutions ME. EIS ME has provided and installed Gasmet CEMS II instrumentation for EDCO’s waste incinerator. They believe that this will pave the way to a better and clearer environment monitoring, especially with measuring hazardous substances in their industry.

Compliance with Local Regulations

The Kingdom of Saudi Arabia has been experiencing rapid development in its metropolitan area leading to social and environmental sustainability challenges – including worsening air quality and its associated health impacts.

The CEMS instrument will provide a comprehensive image on what kind of contaminants are surrounding a certain area. This will also provide information on what are the sources of these contaminants as this will assist in better environmental impact assessment for the country and its constituents.  

About Environment Development Company

Environment Development Company (EDCO) was established in 2005 with the objective to deliver thorough environmental services with emphasis on hazardous waste management, transportation, treatment and disposal, and other related environmental services. Their facility is located within Jubail industrial city limits.

Gasmet Cems II

The Continuous Emissions Monitoring system (CEMS II e) is fully automatic system and has a variety of I/O configuration options. Both measuring data and alarm information can be transferred to other automation or reporting systems with analog or digital format. Additionally, the system is equipped with the possibility to use analog and digital inputs for external data.

Gasmet CEMS II is a modular construction that typically comprises of Gasmet CX4000 FTIR gas analyzer, heated sampling unit, industrial PC and a Zirconia oxygen analyzer which are installed in an air-conditioned cabin. Gasmet CX4000 FTIR gas analyzer allows the simultaneous measurement of up to 50 gas compounds.

Continuous Emission Monitoring System (CEMS) installed in Saudi Arabia

Enviro’ & Industrial Solutions ME supplied, commissioned and installed Gasmet CEMS II TUV & MCERTS certified Continuous Emission Monitoring System in Saudi Arabia for Environment Developent Co. Ltd. (EDCO).

Gasmet CEMS II is a modular construction that typically comprises of Gasmet CX4000 FTIR gas analyzer, heated sampling unit, industrial PC and a Zirconia oxygen analyzer which are installed in an air-conditioned cabin. Gasmet CX4000 FTIR gas analyzer allows the simultaneous measurement of up to 50 gas compounds.

About Environment Development Co. Ltd. (EDCO)

Environmental Development Company (EDCO) was established in 2005 with the objective to develop complete environmental services with emphasis on hazardous waste management, its transportation treatment and disposal, environmental engineering, and other related environmental services.

EDCO has completed the first phase of its facility development to operate a Treatment, Storage and Disposal Facility (TSDF) for hazardous & non Hazardous wastes generated by local and national industries. The company will also provide other environmental services including training of industry personnel, monitoring of sites and procurement of related equipment. The facility is located within Jubail Industrial City limits and has been developed in compliance with Royal Commission standards and regulatory requirements.

The facility is located within Jubail industrial city limits. Specifically, the facility is approximately 4 Km west of the RC landfill on the south side of road 274 which is the southern limit of Jubail phase II. Jubail Industrial City, established in 1975, has achieved a worldwide industrial recognition as an advanced petrochemical industrial complex. Under the patronage of The Royal Commission for Jubail and Yanbu, Jubail has become the nation’s model industrial center known for its productivity, socio-economic impact on the local community, as well as its strict compliance with international industrial standards.

Ras Al Khaimah Lime Co. “NOORA” Continuous Emission Monitoring System

continuous emission monitoring system noor ras al khaimahRas Al Khaimah Lime Co. “NOORA” has awarded Enviro’ & Industrial Solutions ME, a leading CEMS integrator in the Gulf Region, the contract to supply, install and commission a turnkey Continuous Emission Monitoring System (CEMS).

3 Stacks Sequential Monitoring for Gas, Dust Particulates & Flow by 1 Continuous Emission Monitoring System

Key Technologies

  • Fuji NDIR ZRE Analyser for NOx, SO2, CO & O2
  • JCT Sampling & Conditioning System
  • Sintrol Dust Stack Monitor
  • Envitech Environmental Services WinEmag Data Acquisition System

About Ras Al Khaimah Lime Co. “NOORA”

Ras Al Khaimah Lime Co. “NOORA”, was established in 1978 under a Decree from the Rulers of Ras Al Khaimah. The Company had its production facilities commissioned in 1978.

Currently the Company is a subsidiary of Ras Al Khaimah Co. for White Cement and Construction Materials based in Ras Al Khaimah, UAE.

Ras al Khaimah Lime Co. “NOORA”has its lime burning capacity of over 1000 tpd not only catering regional market requirements but also playing an important role as the biggest regional exporter of various lime products. Our products are used in a variety of industries from steel to water purification.

RAK Lime Co. NOORA high quality product, stringent quality assurance parameters, continuous marketing efforts and thorough after sales follow-up, RAK Lime Co. has branded its product locally, regionally and globally, covering the local market and catering prominent multinationals in various industrial segments from West Africa through Far East Asia. All our products are sold under the NOORA brand.

Fujairah Rockwool Factory Continuous Emissions Monitoring Systems

Enviro’ & Industrial Solutions ME, the leading system integrator in the Middle East, has been awarded the contract to integrate two sets of turnkey Continuous Emissions Monitoring System (CEMS) in Fujairah Rockwool Factory, United Arab Emirates.

continuous emission monitoring systems

4 Stacks Sequential Monitoring by 2 Sets of Continuous Emission Monitoring System

Key Technologies

  • Fuji NDIR ZRE Analyser for NO, SO2, CO2 & O2
  • Fuji ZRJ Infrared Gas Analyser for CH4 & CO
  • JCT Sampling & Conditioning System
  • Sintrol Dust Stack Monitor
  • Envitech Environmental Services WinEmag Data Acquisition System

About Fujairah Rockwool Factory

frf_continuous emission monitoring systemsIt was in 1982 that Fujairah Rockwool Factory started operations and in the process became the first company to manufacture Rockwool insulation products in the GCC region. Begun with an annual capacity of 5000 metric tons, the factory has since then expanded operations and is today the largest manufacturer of insulation products in the GCC with supplies being sent to, besides the GCC countries, the Middle East, the Far East and the other parts of the World.

Rockwool as the name implies is made by melting diabase rock mixed with coke and limestone and converting them into fibers. The raw material diabase (basalt rock) is a pure volcanic material which is millions of years old. Rockwool is classified as an inorganic material and has an excellent resistance to high temperatures and possess superior acoustic properties. The factory Utilizes highly advanced technology to melt raw diabase at 1400° C to make the flowing lava spin at high speed using the latest multi spun disc system to produce hairline fibers which are bound together by spraying with a heat setting resin.

The fibers are spread in a conveyor using the pendulum method to achieve an even distribution of density throughout the surface of the resulting products. the special additive is impregnated to the bonded material to make it water resistant. Fujairah Rockwool products are used in both commercial and industrial establishments as in the insulation of power plants, destination plants, petrochemical plants. refineries, offshore drilling equipment, ships and also in houses, offices, buildings, schools, factories, etc. New product applications are being discovered each year with this remarkably versatile product.